Call: +86 18001060290    E-mail: info@sell-server.com

Intel I350 Network Adapter for xFusion Servers

Intel I350 Network Adapter for xFusion Servers

Intel I350 Network Adapter for xFusion Servers

This page groups the xFusion network adapters based on Intel I350. They are offered in 1GbE / 10GbE speeds, with 2/4-port builds and RJ45 interfaces, in both standard PCIe and OCP 3.0 form factors. They are validated for FusionServer V5–V8 rack and high-density nodes.

At a glance

Controller
Intel I350
Port speed
1GbE / 10GbE
Ports
2/4
Connectors
RJ45
Form factor
PCIe card + OCP 3.0
PCIe host
2.0
RDMA / RoCE
No
InfiniBand
No

Overview

Controller silicon: Intel I350. Host interface: PCIe 2.0.

Port speeds available: 1GbE / 10GbE, using RJ45 connectors. 2-port and (where listed) 4-port cards are available. OCP 3.0 mezzanine variants are included for servers with OCP slots.

Cabling note: Optical modules/DAC are sold separately unless the variant states they are included.

Compatible FusionServer models

This product is validated for the following current FusionServer models. Open a model for its full component list and configuration:

Part numbers (PN aliases)

These xFusion part numbers all belong to this product. Different P/Ns reflect speed bins, form factor, vendor/die source or dedicated customer codes – not a different function.

  • 0231Y803
  • 0231Y804
  • 0231Y805
  • 0302Y043
  • 0302Y044
  • 0302Y054

How to choose

Choose the speed and connector to match your top-of-rack switch: copper DAC for short, low-cost links, fiber/AOC for longer runs, and RJ45/BASE-T where copper structured cabling already exists. Prefer OCP 3.0 on servers that route the NIC through the chassis to free PCIe slots.

Frequently asked questions

What controller chip is used?

Intel I350.

Which speeds and ports are available?

1GbE / 10GbE, in 2/4-port builds.

What connectors does it use?

RJ45.

Does it support RDMA/RoCE?

This chip family is a general-purpose Ethernet NIC without RDMA offload.

Is SR-IOV supported for virtualization?

Limited/entry-level; check the specific variant for SR-IOV.

Is there an OCP 3.0 version?

Yes, both PCIe add-in-card and OCP 3.0 variants are listed.

Can it run InfiniBand?

No, it is an Ethernet adapter.

Which operating systems have drivers?

Enterprise Linux, Windows Server and VMware ESXi via the vendor driver/ firmware set; the OS-inbox driver covers basic operation.

Are optical modules or DAC cables included?

Optical modules/DAC are sold separately unless the variant states they are included.

Which FusionServer models support it?

40 models, including 1158H V7, 1258H V7, 1288 V8, 1288H V5, 1288H V6, 1288H V7; the full list is below.

How do I order the exact variant I need?

Send the P/N or tell us the speed, ports, connector and form factor (PCIe/OCP); we confirm the exact xFusion P/N and quote it.

What condition and warranty apply?

Genuine xFusion adapter (e.g. 0231Y803), new/tested with a 1-year warranty.

Request this part

Send us the part number (or your server model and quantity) and we will confirm compatibility, condition, warranty, lead time and pricing. We support single units, fleet maintenance and project volumes.

Request a quote Look up another part number

Leave a message