Intel XL710 Network Adapter for xFusion Servers
This page groups the xFusion network adapters based on Intel XL710. They are offered in 10GbE speeds, with 4-port builds and SFP+ interfaces. They are validated for FusionServer V5–V8 rack and high-density nodes.
At a glance
- Controller
- Intel XL710
- Port speed
- 10GbE
- Ports
- 4
- Connectors
- SFP+
- Form factor
- PCIe card
- PCIe host
- 3.0
- RDMA / RoCE
- Yes
- InfiniBand
- No
Overview
Controller silicon: Intel XL710. Host interface: PCIe 3.0.
Port speeds available: 10GbE, using SFP+ connectors. 2-port and (where listed) 4-port cards are available.
The controller supports RDMA over Converged Ethernet (RoCE) for low-latency storage and HPC traffic, plus SR-IOV virtual functions for virtualized hosts.
Cabling note: Optical modules/DAC are sold separately unless the variant states they are included.
Compatible FusionServer models
This product is validated for the following current FusionServer models. Open a model for its full component list and configuration:
- 1158H V7
- 1258H V7
- 1288 V8
- 1288H V5
- 1288H V6
- 1288H V7
- 1288X V5
- 2158H V8-Turin
- 2258 V7
- 2288 V5
- 2288 V7
- 2288 V8
- 2288H V5
- 2288H V6-16DIMM
- 2288H V6-32DIMM
- 2288H V7
- 2288X V5
- 2488 V5
- 2488H V5
- 2488H V6
- 2488H V7
- 5288 V5
- 5288 V6
- 5288 V7
- 5288X V5
- 5885H V5
- 5885H V6
- 5885H V7
- 8100 V5
- 9008 V5[cascade]
- G5200 V7
- G5500 V6
- G5500 V6 Supermicro
- G5500 V7
- X6000 XH321 V5
- X6000 XH321 V6
Part numbers (PN aliases)
These xFusion part numbers all belong to this product. Different P/Ns reflect speed bins, form factor, vendor/die source or dedicated customer codes – not a different function.
- 0231Y812
- 0231Y830
- 0302Y047
How to choose
Choose the speed and connector to match your top-of-rack switch: copper DAC for short, low-cost links, fiber/AOC for longer runs, and RJ45/BASE-T where copper structured cabling already exists. Prefer OCP 3.0 on servers that route the NIC through the chassis to free PCIe slots.
Frequently asked questions
What controller chip is used?
Intel XL710.
Which speeds and ports are available?
10GbE, in 4-port builds.
What connectors does it use?
SFP+.
Does it support RDMA/RoCE?
Yes, RoCE is supported for low-latency storage and HPC.
Is SR-IOV supported for virtualization?
Yes, SR-IOV virtual functions are supported on these adapters.
Is there an OCP 3.0 version?
This page covers the PCIe add-in-card form factor.
Can it run InfiniBand?
No, it is an Ethernet adapter.
Which operating systems have drivers?
Enterprise Linux, Windows Server and VMware ESXi via the vendor driver/ firmware set; the OS-inbox driver covers basic operation.
Are optical modules or DAC cables included?
Optical modules/DAC are sold separately unless the variant states they are included.
Which FusionServer models support it?
36 models, including 1158H V7, 1258H V7, 1288 V8, 1288H V5, 1288H V6, 1288H V7; the full list is below.
How do I order the exact variant I need?
Send the P/N or tell us the speed, ports, connector and form factor (PCIe/OCP); we confirm the exact xFusion P/N and quote it.
What condition and warranty apply?
Genuine xFusion adapter (e.g. 0231Y812), new/tested with a 1-year warranty.
Request this part
Send us the part number (or your server model and quantity) and we will confirm compatibility, condition, warranty, lead time and pricing. We support single units, fleet maintenance and project volumes.
serverbastion.com

WeChat
Scan the QR Code with wechat