Are your enterprise servers new and genuine?

Yes. We supply new and factory-sealed new-old-stock (NOS) servers from Dell, Lenovo, xFusion and Inspur, sourced through authorized manufacturer channels. New servers are covered by a 3-year warranty.

Can you ship GPU and storage servers to my country?

We export to 60+ countries across North America, Europe, the Middle East, Southeast Asia, Africa and Latin America, with door-to-door freight, customs documentation and insurance handled by our team.

How fast will I receive a quotation?

Most configuration lists receive a detailed quotation within one business day. For complex deployments, our engineers confirm compatibility and provide options before pricing.

Do you support system integrators and resellers?

Yes — system integrators, IT resellers, project suppliers and tender bidders are our primary customers. We offer multi-brand consolidation, neutral configuration advice and repeat-order account support.

How do I pay, and what terms are available?

We accept international bank transfer (T/T) in USD. Standard orders are confirmed against a proforma invoice, while established repeat accounts and project bidders can discuss agreed payment terms in advance.

What is the lead time for delivery to the Middle East or Southeast Asia?

In-stock configurations are normally built and tested within a few business days, followed by door-to-door air or sea freight depending on the destination. We provide a clear timeline and tracking once the order is confirmed.

How is warranty and after-sales support handled overseas?

New servers carry a 3-year warranty. Our support team coordinates with the manufacturer and arranges replacement parts and remote troubleshooting, so you receive the same level of service in any region we ship to.

Can you build a fully custom configuration to my specification?

Yes. Send your required CPU, memory, drives, accelerators, power and networking preferences — or simply describe the workload and target budget. Our engineers specify, assemble and burn-in test the complete system before shipment.

ConnectX-5, ConnectX-6 Network Adapters for xFusion Servers

This page groups the xFusion network adapters based on Mellanox ConnectX-5, Nvidia ConnectX-6. They are offered in 10GbE / 25GbE / 200GbE speeds, with 1/2-port builds and QSFP56, SFP+, SFP28 interfaces, in both standard PCIe and OCP 3.0 form factors. They are validated for FusionServer V5–V8 rack and high-density nodes.

At a glance

Controller: Mellanox ConnectX-5, Nvidia ConnectX-6
Port speed: 10GbE / 25GbE / 200GbE
Ports: 1/2
Connectors: QSFP56, SFP+, SFP28
Form factor: PCIe card + OCP 3.0
PCIe host: 3.0/4.0
RDMA / RoCE: Yes
InfiniBand: Yes

Overview

Controller silicon: Mellanox ConnectX-5, Nvidia ConnectX-6. Host interface: PCIe 3.0/4.0.

Port speeds available: 10GbE / 25GbE / 200GbE, using QSFP56, SFP+, SFP28 connectors. 2-port and (where listed) 4-port cards are available. OCP 3.0 mezzanine variants are included for servers with OCP slots.

The controller supports RDMA over Converged Ethernet (RoCE) for low-latency storage and HPC traffic, plus SR-IOV virtual functions for virtualized hosts.

Some variants also operate as InfiniBand HCAs (NDR/HDR/EDR), so they can be used in IB fabrics as well as Ethernet.

Cabling note: Optical modules/DAC are sold separately unless the variant states they are included.

Compatible FusionServer models

This product is validated for the following current FusionServer models. Open a model for its full component list and configuration:

Part numbers (PN aliases)

These xFusion part numbers all belong to this product. Different P/Ns reflect speed bins, form factor, vendor/die source or dedicated customer codes – not a different function.

0231Y238
0231Y366
0231Y821
0231Y822
0231Y824
0231Y826
0257Y102
0257Y106
0257Y114
0257Y150
0302Y049

How to choose

Choose the speed and connector to match your top-of-rack switch: copper DAC for short, low-cost links, fiber/AOC for longer runs, and RJ45/BASE-T where copper structured cabling already exists. Prefer OCP 3.0 on servers that route the NIC through the chassis to free PCIe slots.

Frequently asked questions

What controller chip is used?

Mellanox ConnectX-5, Nvidia ConnectX-6.

Which speeds and ports are available?

10GbE / 25GbE / 200GbE, in 1/2-port builds.

What connectors does it use?

QSFP56, SFP+, SFP28.

Does it support RDMA/RoCE?

Yes, RoCE is supported for low-latency storage and HPC.

Is SR-IOV supported for virtualization?

Yes, SR-IOV virtual functions are supported on these adapters.

Is there an OCP 3.0 version?

Yes, both PCIe add-in-card and OCP 3.0 variants are listed.

Can it run InfiniBand?

Yes, certain listed variants operate as InfiniBand HCAs as well as Ethernet.

Which operating systems have drivers?

Enterprise Linux, Windows Server and VMware ESXi via the vendor driver/ firmware set; the OS-inbox driver covers basic operation.

Are optical modules or DAC cables included?

Optical modules/DAC are sold separately unless the variant states they are included.

Which FusionServer models support it?

34 models, including 1158H V7, 1258H V7, 1288 V8, 1288H V6, 1288H V7, 2158H V8-Genoa; the full list is below.

How do I order the exact variant I need?

Send the P/N or tell us the speed, ports, connector and form factor (PCIe/OCP); we confirm the exact xFusion P/N and quote it.

What condition and warranty apply?

Genuine xFusion adapter (e.g. 0231Y238), new/tested with a 1-year warranty.

Request this part

Send us the part number (or your server model and quantity) and we will confirm compatibility, condition, warranty, lead time and pricing. We support single units, fleet maintenance and project volumes.

Request a quote Look up another part number